Nortel Networks 6300 manual Connecting a LAN Using Ethernet

Chapter 2 Installing the Remote Annex 6300

Attaching the Mounting Bracket and Device to the Rack

Attach the mounting bracket to the rack as follows:

1Position the Remote Annex horizontally, facing forward in the rack.

2Align the holes in the mounting bracket with the holes in the rack.

3Insert the mounting screws and tighten the screws to attach the Remote Annex 6300 to the rack (see Figure 2-4).

			115
			ISDN PRI
CONSOLE	10BASE5	10BASE2	10BASET
			LINK

Figure 2-4. Attaching the Mounting Bracket and Device to the Rack

Connecting a LAN Using Ethernet

The Remote Annex 6300 supports three types of Ethernet connections:

Thin Ethernet, Thick Ethernet, or Twisted Pair (see Figure 2-5).

Each connection type requires a different connection procedure described in the following sections. Connect only one type of Ethernet cabling at one time.

Make sure the Remote Annex 6300 is powered off before disconnecting or connecting the Ethernet cabling.

2-6 Remote Annex 6300 Hardware Installation Guide