Nortel Networks 6300 manual Connecting a Console Terminal

Chapter 2 Installing the Remote Annex 6300

Connecting a Console Terminal

A console terminal is used to access the ROM Monitor and boot the Remote Annex 6300 for the first time. Follow the steps in this section to connect a console terminal to the console port located on the rear panel of the Remote Annex 6300.

1Connect the console terminal’s I/O connector to the cable (the accessory kit includes a cable) using a DB-25 DTE drop adapter (see Figure 2-9).

Figure 2-9. Connecting the Cable to the DB-25 DTE Drop Adapter

Remote Annex 6300 Hardware Installation Guide 2-11