Chapter 2 Installing the Remote Annex 6300

4Record the Remote Annex’s Ethernet address for future reference.

At the monitor prompt, type addr -dand press Return . The screen display looks similar to this:

monitor:: addr -d

Ethernet address (hex): 00-80-2D-XX-XX-XX

Internet address: <uninitialized>

Subnet mask: 255.255.0.0

Broadcast address: 0.0.0.0

Preferred Load Host address: <any host>

Preferred Dump Host address: 0.0.0.0

Load/Dump Gateway address: 0.0.0.0

Type of IP packet encapsulation: <ethernet>

Load Broadcast: Y

Installing the Operational Software and Loading the Image

Use this section if you have successfully connected the Remote Annex 6300 to your LAN.

This section describes:

How to install the Remote Annex 6300’s operational software and image on a device that resides on a network accessible to the Remote Annex 6300.

How to download the operational image from the device to the Remote Annex 6300.

Remote Annex 6300 Hardware Installation Guide

2-17

Page 53
Image 53
Nortel Networks 6300 manual Installing the Operational Software and Loading the Image