Chapter 2 Installing the Remote Annex 6300
Connecting Twisted Pair Ethernet (10BaseT) Cable
Follow the steps in this section to connect Twisted Pair (10BaseT)
Ethernet cable to the Remote Annex 6300 (see Figure
1Insert the connector located on the Twisted Pair Ethernet cable into the 10BaseT connector on the rear panel of the Remote Annex 6300.
2When the connector clicks into place, the connection is secure.
3Verify that the Link Indicator is green.
The green link indicator LED next to the 10BaseT connector goes on when power is applied and an active 10BaseT network segment is plugged in.
