INSTALLATION
MOUNTING THE APPLIANCE
FOLLOW THE SUPPLIED separate mounting in- structions when installing the appliance.
PRIOR TO CONNECTING
CHECK THAT THE VOLTAGE on the rating plate corre- sponds to the voltage in your home.
DO NOT REMOVE THE MICROWAVE INLET PROTECTION
PLATES located on the side
of the oven cavity wall.
They prevent grease & food 
particles from entering the 
microwave inlet channels. 
ENSURE the oven cavity is empty before mounting.
ENSURE THAT THE APPLIANCE IS NOT DAMAGED. Check
that the oven door closes firmly against the door support and that the internal door seal is not damaged. Empty the oven and clean the interior with a soft, damp cloth.
AFTER CONNECTING
THE OVEN CAN BE OPERATED ONLY if the oven door is
firmly closed.
THE EARTHING OF THIS APPLIANCE is compulsory. The
manufacturer will accept no responsibility for injury to persons, animals or damage to ob- jects arising from the
DO NOT OPERATE THIS APPLIANCE if it has a damaged
mains cord or plug, if it is not working proper- ly, or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Keep the cord away from hot surfaces. Electri- cal shock, fire or other hazards may result.
DO NOT USE EXTENSION CORD:
IF THE POWER SUPPLY CORD IS TOO SHORT, have a
qualified electrician or serviceman install 
an outlet near the appliance.
THE FIRST TIME THE OVEN IS SWITCHED ON, you will be
asked to set the language and current time. Follow the instructions under the headline “Changing settings” in this instructions for use. The appliance is ready to use after these two steps have been taken.
The manufacturers are not liable for any problems caused by the user’s failure to ob- serve these instructions.
2
