Nortel Networks 6300 manual Command Descriptions

Chapter 3 ROM Monitor Commands

Default or current values for parameters are displayed in brackets.

For example:

Enter broadcast address [132.245.6.255]:

At the prompt, enter a different value, or press Return to leave the displayed value unchanged.

You can use unique abbreviations for all ROM Monitor commands except erase. For example, enter boot as bo, and enter net as n. If you enter an abbreviation that is not unique, an error message describing the command as ambiguous is displayed on the console terminal.

Command Descriptions

Table 3-1 lists the ROM Monitor commands; the following subsections describe them.

Table 3-1. ROM Monitor Commands

Command	Description	Use
addr [-d]	Displays and sets	Changing IP
	EEPROM values	configuration
	relevant to IP network	parameters.
	addressing, including
	the unit’s IP address.
boot [-v] [<file>]	Manually boots and	Changing the address of
	loads the unit’s	the boot image.
	operating code.

(continued on next page)

3-2 Remote Annex 6300 Hardware Installation Guide