Nortel Networks 6300 manual Echorequest

Chapter 3 ROM Monitor Commands

Table 3-1. ROM Monitor Commands (continued)

Command	Description	Use
mop [-d]	Displays and sets	Loading software
(not supported in this	EEPROM values	from a DEC VMS
	relevant to VAX/VMS	host. This
release)
	network addressing,	command is not
	including the MOP	used for this
	load/dump address.	configuration of the
		Remote Annex
		6300.
net	Executes an Ethernet	Checking your
	transceiver loopback	Ethernet
	test.	connection.
option_key [-d]	Sets or displays the	Checking your
	option key.	option key setting.
ping	Sends ICMP	Checking to see if a
	ECHO_REQUEST	host or gateway
	datagram to a host or	can be reached.
	gateway.
ports [-d]	Shows the current	Checking a port.
	status of all ports.
sequence [-d <list>]	Displays and edits the	Checking or
	load/dump interface	changing the load/
	list.	dump interface list.
stats	Displays current	Checking the
	network statistics	network resources.
	gathered by the ROM.

3-4 Remote Annex 6300 Hardware Installation Guide