Troubleshooting
Synchronizing the Receiver and Wireless Desktop 280
1.Press the connect button on top of the receiver, and then press the button on the bottom of the keyboard. It should connect within 10 seconds.
2.Press the connect button on the top of the receiver, and then press the button on the bottom of the mouse. Within 10 seconds, it should connect.
3.If the keyboard did not connect, please repeat step 1.
4.If the mouse did not connect, please repeat step 2.
Switching Channels
If interference occurs while using the keyboard and/or mouse, switch channels by following the steps below:
Keyboard: Press the button on the bottom of the keyboard to switch channels
Mouse: | Press the button on the bottom of the mouse to |
| switch channels |
If the keyboard and/or mouse is/are not working after installation:
Be sure the receiver’s cables are plugged into either the computer’s PS/2 ports or a USB port. If you are connecting it via PS/2, make sure that both plugs are being used (purple keyboard connector and the USB connection with the green PS/2 adapter). If you are connecting via USB, make sure that you only connect the USB connector.
15
19/5/05 11:28:40 am |
