Chapter 14

Solution 3: Select the correct OCR language

Solution: Select the correct OCR language in the software.

NOTE: If you are using HP Photosmart Essential, the Optical Character Recognition (OCR) software might not be installed on your computer. To install the OCR software, you must re-insert the software disk and select OCR under the Custom installation options.

Cause: The scan document settings were not set to the correct optical character recognition (OCR) language. The OCR language tells the software how to interpret the characters it sees in the original image. If the OCR language does not match the language in the original, the scanned text might be incomprehensible.

The scan feature does not work

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn on the computer

Solution 2: Check the cables

Solution 3: Install or reinstall the HP Photosmart Software

Troubleshooting

Solution 1: Turn on the computer

Solution: Turn on the computer.

Cause: The computer was turned off.

If this did not solve the issue, try the next solution.

Solution 2: Check the cables

Solution: Check the cables that connect the product to your computer.If the product is connected to the computer through a wired or wireless connection make sure that the respective connections are active and the product is turned on.

Cause: The product was not connected to the computer. If this did not solve the issue, try the next solution.

Solution 3: Install or reinstall the HP Photosmart Software

Solution: Install or reinstall the software that came with the product.

Cause: The software that came with the product was not installed or was not running.

198 Troubleshooting

Page 201
Image 201
HP C6340, C6380 Scan feature does not work, Solution 3 Select the correct OCR language, Solution 1 Turn on the computer