Chapter 4

Finish setup

Use the Embedded Web Server to modify network settings

The Embedded Web Server gives you an intuitive interface to your network connection parameters.

To access the Embedded Web Server setup wizard

1.Print a network configuration page to find the IP address for the product.

2.In the Address box in your Web browser on your computer, type the IP address of the product, as shown on the network settings page. For example, http:// 192.168.1.101.

The Embedded Web Server Home page appears, showing information for the product.

NOTE: If you are using a proxy server in your browser, you might need to disable it to access the Embedded Web Server.

3.Click the Networking tab.

4.Click Wired (802.3) or Wireless (802.11) in the Connections navigation menu.

5.Click Start Wizard, and then follow all of the wizard instructions.

Related topics

View and print network settings” on page 37

Network configuration page definitions

The network configuration page shows the network settings for the product. There are settings for general information, 802.3 wired (Ethernet), and 802.11 wireless.

This section contains the following topics:

General network settings

Wired (802.3) network settings

Wireless (802.11) network settings

Related topics

View and print network settings” on page 37

Network glossary” on page 48

42 Finish setting up the HP All-in-One

Page 45
Image 45
HP C6340, C6380 Use the Embedded Web Server to modify network settings, To access the Embedded Web Server setup wizard