Set the HP All-in-One to be invisible to Bluetooth devices

You can set the HP All-in-One to be either Visible to all Bluetooth devices (public) or Not visible to any (private).

Visible to all: This is the default accessibility level. Any Bluetooth device within range can print to the HP All-in-One.

Not visible: Only Bluetooth devices that have stored the device address of the HP All- in-One can print to it.

To set the product to be Not visible

1.Press Setup.

2.Press the down arrow button until Bluetooth is highlighted, and then press OK.

3.Press the down arrow button until Visibility is highlighted, and then press OK.

4.Press the down arrow button to select Not visible, and then press OK.

The product is inaccessible to Bluetooth devices that have not stored its device address.

Finish setup

Reset Bluetooth settings on the HP All-in-One

You can reset all of the Bluetooth settings on the HP All-in-One to the factory defaults.

NOTE: Only select Reset Bluetooth if you want all of the HP All-in-One Bluetooth settings returned to factory defaults.

To reset the Bluetooth settings

1.Press Setup.

2.Press the down arrow button until Bluetooth is highlighted, then press OK.

3.Press the down arrow button until Reset Bluetooth is highlighted, then press OK.

Connect to a Bluetooth® device

55

Page 58
Image 58
HP C6380, C6340 manual Set the HP All-in-One to be invisible to Bluetooth devices, To set the product to be Not visible