If this did not solve the issue, try the next solution.

Solution 3: Ensure that the product is connected to a suitable power source

Solution: Verify that the product is properly connected to a suitable power source.

To verify the product is connected to a suitable power source

1.Make sure that you are using the power cord provided with the product.

2.If the product is connected to a computer, make sure the computer has a grounded (three-prong) power plug.

3.Make sure the power cord is firmly connected to both the product and the power adaptor.

4.Plug the power cord directly into a power outlet.

1Power connection

2Power cord and adaptor

3Power outlet

5.Try to print from your computer.

If the product prints when plugged directly into a power outlet while disconnected from any power strips or surge suppressors, the power strip or surge suppressor might not be allowing sufficient voltage to reach the product.

6.If the product cannot print and the print carriage is still stalled, contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: There might not be sufficient voltage for the product.

Troubleshooting

Errors 263

Page 266
Image 266
HP C6380, C6340 manual Try to print from your computer