To save photos

1.Insert a memory card into the appropriate slot on the product or connect a storage device to the front USB port.

2.Press the right arrow button until Save is highlighted, and then press OK.

NOTE: If the product is network-connected, a list of available computers appears. Select the computer to which you want to transfer the photos, and then continue to the next step.

3.Follow the onscreen prompts on your computer to save the photos to your computer.

Edit photos using the control panel

The HP All-in-One offers several basic editing features that you can use to edit your photos manually before you print them, as well as a feature that enables you to automatically enhance your photos.

This section contains the following topics:

Remove red-eye

Rotate a photo

Zoom and pan to crop a photo

Automatically enhance your photos

Print a frame around your photo

Adjust the brightness of your photos

Apply special color effects to your photos

Photos

Remove red-eye

The flash on a camera (especially on older camera models) can sometimes cause a subject's eyes to appear red in your photos. The HP All-in-One is set to automatically remove redness so that eyes appear the correct shade in your photos.

NOTE: The changes you make to the photo apply only to viewing and printing the photo. The changes will not be saved on the memory card.

NOTE: This feature is only available when a memory card or storage device is inserted.

To remove red-eye from photos

By default, red-eye correction is automatically applied to all photos in the print queue. To turn off this feature, press the Red-Eye Removal button on the control panel when a memory card or storage device is inserted.

Related topics

Print photos” on page 94

Edit photos using the control panel

97

Page 100
Image 100
HP C6380, C6340 manual Edit photos using the control panel, Remove red-eye, To save photos, To remove red-eye from photos