HP C6380, C6340 manual Connect to a computer, USB connection, To turn the tips slideshow on or off

To turn the tips slideshow on or off

1.Press Setup.

2.Press the down arrow button to highlight Tools, and then press OK.

3.Press the down arrow button to highlight Tips Slideshow, and then press OK.

4.Press the down arrow or the up arrow button to highlight On or Off, and then press OK.

Connect to a computer

The HP All-in-One comes equipped with a USB port so you can connect directly to a computer using a USB cable. You can also connect the HP All-in-One to either a wired or wireless network.

Description	Recommended number	Supported software	Setup instructions
	of connected	features
	computers for best
	performance
USB connection	One computer connected	All features are	Follow the Start Here
	with a USB cable to the	supported.	guide for detailed
	rear USB 2.0 High Speed		instructions.
	port on the HP All-in-One.
Wired (Ethernet) network	Up to five computers	All features are	Follow the instructions in
connection	connected to an HP All-	supported.	“Set up the HP All-in-One
	in-One using a hub or		on a wired (Ethernet)
	router.		network” on page 25.
Integrated Wireless	Up to five computers	All features are	Follow instructions in “Set
(WLAN 802.11) network	connected using a	supported.	up the HP All-in-One on
connection	wireless router		an integrated wireless
	(infrastructure mode).		(WLAN 802.11) network”
	One computer (ad hoc		on page 27.
	mode).
Printer sharing	Up to five computers.	All features resident on	Follow the instructions in
	The host computer must	the host computer are	“USB connection”
		supported. Only printing	on page 23.
	be on at all times in order
	to print from the other	is supported from the
		other computers.
	computers.

USB connection

The HP All-in-One supports a rear USB 2.0 High Speed port for connection to a computer.

If you use a USB cable to connect the HP All-in-One to a computer on a network, you can set up printer sharing on your computer. This enables other computers on the network to print to the HP All-in-One, using your computer as the host.

The host computer (your computer, connected directly to the HP All-in-One by a USB cable) has full software functionality. Other computers, which are referred to as the

Finish setup

Connect to a computer 23