HP C6380, C6340 manual Authentication type Encryption

(continued)

Parameter

Authentication type

Encryption

Description

number. Value is from 1 to 14; countries/regions might limit the range of approved channels.

•(number): Value ranging from 1 to 14, depending on country/region.

•None: No channel is in use.

•Not Applicable: The WLAN is disabled or this parameter does not apply to this network type.

NOTE: In ad hoc mode, if you are not able to receive or transmit data between your computer and the HP All-in-One, make sure that you are using the same communication channel on your computer and the HP All-in-One. In infrastructure mode, the channel is dictated by the access point.

Type of authentication in use:

•None: No authentication in use.

•Open System (ad hoc and infrastructure): No authentication

•Shared Key: WEP key is required.

•WPA-PSK(infrastructure only): WPA with Pre-Shared Key.

•Not applicable: This parameter does not apply to this network type.

Authentication verifies the identity of a user or product before granting access to the network, making it more difficult for unauthorized users to access network resources. This security method is common on wireless networks.

A network using Open System authentication does not screen network users based on their identities. Any wireless user can have access from the network. However, such a network might use WEP (Wired Equivalent Privacy) encryption to provide a first level of security against casual eavesdroppers.

A network using Shared Key authentication provides increased security by requiring users or products to identify themselves with a static key (a hexadecimal or alphanumeric string). Every user or product on the network shares the same key. WEP encryption is used along with shared key authentication, using the same key for both authentication and encryption.

Anetwork using server-based (WPA-PSK) authentication provides significantly stronger security, and is supported in most wireless access points and wireless routers. The access point or router verifies the identity of a user or product requesting access to the network before granting that access. Several different authentication protocols might be used on an authentication server.

The type of encryption in use on the network:

•None: No encryption is in use.

•64-bit WEP: A 5-character or 10-hex-digit WEP key is in use.

•128-bit WEP: A 13-character or 26-hex-digit WEP key is in use.

•WPA-AES: Advanced Encryption Standard encryption is in use. This is an encryption algorithm for securing sensitive but unclassified material by US Government agencies.

•WPA-TKIP: Temporal Key Integrity Protocol, an advanced encryption protocol, is in use.

•Automatic: AES or TKIP is in use.

•Not applicable: This parameter does not apply to this network type.

WEP aims to provide security by encrypting data over radio waves so that it is protected as it is transmitted from one end point to another. This security method is common on wireless networks.

Finish setup

Connect to a computer 47