Chapter 14

Troubleshooting

4.Lift the latch handle on the print carriage until it stops.

5.Remove the printhead by lifting it straight up.

6.Make sure the latch handle is raised, and then reinsert the printhead.

7.Carefully lower the latch handle.

NOTE: Make sure you lower the latch handle before reinserting the ink cartridges. Leaving the latch handle raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in order to correctly install the ink cartridges.

276 Troubleshooting

Page 279
Image 279
HP C6340, C6380 manual Troubleshooting