![](/images/new-backgrounds/1050399/5039917x1.webp)
Maintenance and care
Machine storage
Put the unit away in a closet or basement for the next use. Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.
Troubleshooting
Reduced Spray OR No Spray
Possible cause
1.Bladder may be empty
2.
3.Pump may have lost prime.
4.The pump belt may be broken.
A.
B.
Slots Pump Belt
Remedies
1.Turn power switch OFF (O); Refill bladder with clean hot tap water.
2.Turn power switch OFF (O); remove tank and reseat tanks.
3.Turn power switch OFF (O); after 1 minute turn ON (I) and depress spray release trigger.
4.Turn power switch OFF (O) and unplug from the outlet. To check if a pump belt has broken, you will need a flat head screwdriver.
A.Insert the blade end into the slot of the belt access door to release. Examine the belt for breakage. You should be able to see the pump belt looped around the motor shaft. If it is broken or missing, please refer to Replacement Parts on page 11.
Areplacement belt may be ordered at www.bissell.com or by calling BISSELL Consumer Services at
will accompany the replacement belt.
B.When replacing belt access door be sure to line up slots of belt access door with slots in machine, slide door into place and snap shut.
DirtLifter PowerBrush Does Not Turn
Possible cause
1.The brush belt or pump belt is off or broken.
Remedies
1.Refer to Remedy 5 above to check if brush belt or pump belt is broken.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 9 |
10/14/08 12:55:18 PM |