2-4

Power Management Setup

 

 

 

 

 

 

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 

 

 

 

 

Power Management Setup

 

 

 

ACPI Suspend Type

 

[S1(POS)]

 

Item Help

 

Power LED in S1 state

[Blinking]

 

Menu Level`

 

Off by Power button

 

[Instant-Off]

 

 

 

AC BACK Function

 

[Soft-Off]

 

 

 

 

PME Event Wake Up

[Enabled]

 

 

 

 

ModemRingOn

 

 

[Enabled]

 

 

 

 

Resume by Alarm

 

[Disabled]

 

 

 

x

Date (of Month) Alarm

Everday

 

 

 

x

Time (hh:mm:ss) Alarm

0 : 0 : 0

 

 

 

 

POWER ON Function

[Disabled]

 

 

 

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F5: Previous Values

F6: Fail-Save Defaults

 

F7: Optimized Defaults

 

 

 

 

 

 

 

ACPI Suspend Type

 

 

 

 

 

S1(POS)

 

Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)

 

S3(STR)

 

Set ACPI suspend type to S3/STR(Suspend To RAM).

 

 

Power LED in S1 state

 

 

 

 

 

Blinking

 

In standby mode(S1), power LED will blink. (Default value)

 

 

Dual/Off

 

In standby mode(S1):

 

 

 

 

 

 

a. If use single color LED, power LED will turn off.

 

 

 

 

b. If use dual color LED, power LED will turn to another color.

 

 

Off by Power button

 

 

 

 

 

Instant-off

 

Press power button then Power off instantly. (Default value)

 

 

Delay 4 Sec.

Press power button 4 seconds to Power off. Enter suspend if button is pressed less

 

 

 

than 4 seconds.

 

 

 

 

AC BACK Function

 

 

 

 

 

Soft-Off

 

When AC-power back to the system, the system will be in "Off" state. (Default value)

 

Full-On

 

When AC-power back to the system, the system always in "On" state.

 

Memory

 

When AC-power back to the system, the system will return to the Last state before

 

 

 

AC-power off.

 

 

 

 

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled

Disable this function.

Enabled

Enable PME as wake up event. (Default value)

ModemRingOn

An incoming call via modem can awake the system from any suspend state.

Disabled

Disable Modem Ring On function.

Enabled

Enable Modem Ring On function. (Default value)

English

- 39 -

BIOS Setup

Page 39
Image 39
Intel GA-8IPE1000 user manual Power Management Setup, PME Event Wake Up, ModemRingOn