Intel GA-8IPE1000 On-Chip Sata, Sata Port0 configure as, Sata Port1 configure as, USB Controller

English

On-Chip SATA

Disabled	Disable onboard Seria ATA function.
Auto	When there is no device to be plugged in IDE1 or IDE2, SATA controller will
	remap to IDE controller. (Default value)
Manual	Set SATA mode manually from "SATA Port0 configure as" item.

SATA Port0 configure as

IDE Pri. Master	Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
	IDE Primary Master.
IDE Pri. Slave	Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
	IDE Primary Slave.
IDE Sec. Master	Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
	IDE Secondary Master.
IDE Sec. Slave	Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
	IDE Secondary Slave.
SATA Port0	Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This mode
	is only supported by Windows XP or later. (Default value)
SATA Port1	Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This mode
	is only supported by Windows XP or later.

SATA Port1 configure as

The setting depends on "SATA Port0 configure as" item setting. (Default: SATA Port1)

USB Controller

Enabled	Enable USB controller. (Default value)
Disabled	Disable USB controller.

USB 2.0 Controller

You can disable this function if you are not using onboard USB 2.0 feature.

Enabled	Enable USB 2.0 controller. (Default value)
Disabled	Disable USB 2.0 controller.

USB Keyboard Support

Enabled	Enable USB keyboard support.
Disabled	Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled	Enable USB mouse support.
Disabled	Disable USB mouse support. (Default value)

AC97 Audio

Auto	Auto detect AC97 audio function. (Default value)
Disabled	Disable AC97 audio function.

Onboard H/W LAN

Enabled	Enable onboard H/W LAN function. (Default value)
Disabled	Disable this function.

Only for GA-8IPE1000-G.

Only for GA-8IPE1000-L.

GA-8IPE1000 Series Motherboard - 36 -