Onboard LAN Boot ROM 
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable this function. |
Disabled | Disable this function. (Default value) |
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal | Set onboard I/O chip UART to normal mode. (Default value) |
IrDA | Set onboard I/O chip UART to IrDA mode. |
ASKIR | Set onboard I/O chip UART to ASKIR mode. |
UR2 Duplex Mode
This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at Normal.
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
TxD, RxD Polarity Active
This function will available when "UART Mode Select" doesn't set at Normal.
Hi, Hi | Set TxD, RxD polarity active to Hi, Hi. |
Hi, Lo | Set TxD, RxD polarity active to Hi, Lo. |
Lo, Hi | Set TxD, RxD polarity active to Lo, Hi. (Default value) |
Lo, Lo | Set TxD, RxD polarity active to Lo, Lo. |
Use IR Pins
This function will available when "UART Mode Select" doesn't set at Normal.
RxD2, TxD2 | Set IR pins to use RxD2, TxD2. |
Set IR pins to use |
Only for
Only for
- 37 - | BIOS Setup |
English
