6030 Operator’s Handbook

Loading for Peel Mode–––––––––––––––––––––––––––––––––––––––

Peel mode separates labels from the backing paper, allowing you to print and apply labels immediately. You must load labels in this mode when the On-Demand sensor is enabled.

To load your supply:

1.Turn the printer on. After the printer initializes, press l. You will see:

RELOADING_ 1 = Exit

2.Press the latch buttons as shown and open the supply cover completely.

Supply

Cover

Latch

Button

3-2

Page 16
Image 16
Monarch 6030TM manual Loading for Peel Mode