6030 Operator’s Handbook

2.Remove your supply.

3.Open the label deflector by gently pressing down with two fingers.

Platen

Roller

4.Clean the platen roller and remove any adhesive buildup.

5.Turn the platen roller with your finger, and then continue cleaning.

6.Reload your supply and close the label deflector and supply cover.

To clean the feed and pinch rollers:

Turn the platen roller. This turns the pinch roller. Remove any adhesive buildup as the rollers turn.

Allow the printer to dry before reloading your supplies.

7-6

Page 54
Image 54
Monarch 6030TM manual Platen Roller