Chapter 10. Using Diagnostics

To adjust the contrast:

1.Press eto select Printing from the HDW TEST MENU.

2.From the PRINTING MENU, press >until you see Contrast.

3.Press e.

4.At Supply Type?, use the arrow keys to select the supply type you need and press e.

5.At Bar code Type?, use the arrow keys to select the bar code type you need to adjust. Then press e.

1= Serial bar code printing 2= Parallel bar code printing

3= Both - Serial/Parallel bar code printing 4= MaxiCode bar code printing

or

b= Exit

nIf you are not sure what Bar code Type you have, see "Sample of Bar Code Types."

6.At Contrast #1, 2 (or last value entered), press <or >to adjust the contrast in increments of +/- 1. The higher the number, the darker the print; the lower the number, the lighter the print.

7.Press e. The test sample shown prints automatically. The display returns to Contrast #.

8.Press b until the cursor is at the MAIN MENU.

10-9

Page 75
Image 75
Monarch 6030TM manual 10-9