Monarch 6030TM manual Testing the Scanner, Battery = ###

6030 Operator’s Handbook

2.Press e. You will see:

BATTERY = ###

The acceptable operating range is 780-995. However, if a fully charged battery displays an amount below 900, the battery may be losing its recharging capacity. Use another battery, make a note of the number, and call Service.

3.Press b.

Testing the Scanner

The scanner test checks the functionality of the scanner.

nUses scanner setting All. See "Selecting Bar Codes for Scanning" in Chapter 6.

To run the Scanner test:

1.Set the scanner to All. See "Selecting Bar Codes for Scanning" in Chapter 6.

2.From the HDW TEST MENU, press > until you see:

Battery

Scanner

3.Press e you will see SCAN A BARCODE.

4.Aim the scanner at a bar code and press the trigger.

FIf the scan is successful you will see the bar code data on the second line of the display.

FIf the scan is unsuccessful you will see the message NO DATA RECEIVED on the second line of the display.

5.Press b.

10-16