13. Press e if this is the correct length.
-OR-
To change the length, press c, enter the new length,
and press e.
Removing Supplies –––––––––––––––––––––––––––––––––––––––––
To remove supplies:
1. If you are in Peel mode, tear the backing paper just above
the pinch roller.
2. Open the supply cover completely.
3. Twist the supply roll or core while pushing down, and then
pull forward to remove.
nIf you are in Peel mode, continue with the following steps to
remove the backing paper.
4. Pull the backing paper out through the back of the printer.
6030 Operator’s Handbook
3-12