6030 Operator’s Handbook
To display Machine Totals:
1.From the DIAGNOSTIC MENU, press > until you see:
Memory Info.
Machine Totals
2.Press e. You will see:
Print Total
###
3.Press e or b.
Performing Hardware Tests ––––––––––––––––––––––––––––––––––
The HARDWARE TEST menu has the following selections:
Printing Tests | Prints a Test Pattern, performs a Speed |
| Test, checks the Gray Scale of a printed |
| label, and adjusts the print contrast. |
Serial Port Test | Checks the Serial Port. |
Sensors Tests | Tests the |
| sensors. |
Printhead Tests | Checks the Dot Resistance and |
| Temperature of the printhead. |
Battery Test | Checks the Battery recharging capacity. |
Scanner Test | Checks the functionality of the Scanner. |
Display Tests | Checks the functionality of the Backlight |
| and performs a Pixel Test. |
Keypad Test | Checks the functionality of each key on |
| the Keypad. |
Motor | Checks the functionality of the motor. |
