To run the Print Speed test:
1. Press e to select Printing from the HDW TEST
MENU.
2. From the PRINTING MENU, press > until you see:
Test Pattern
Print Speed
3. Press e. You will see READY.
4. Press the trigger to print the test sample. Use the metric
scale below or a metric ruler to measure your test sample.
If your test sample measures more than 101 mm or less
than 99 mm, save your test sample and call Service.
nThis test must be performed in Non-peel mode.
To run the Gray Scale:
1. Press e to select Printing from the HDW TEST
MENU.
2. From the PRINTING MENU, press > until you see:
Print Speed
Gray Scale
3. Press e. You will see READY.
Chapter 10. Using Diagnostics
10-7