6030 Operator’s Handbook

12.Hold the supply edge between the feed and pinch rollers. Press the trigger to feed the backing paper through the rollers.

Feed

Roller

Pinch

Roller

13.Press 1 if you are loading the same supply type. Press e to start your application. Or, press 2 to load a different supply type or size. You will see:

Supply Type?

1 = Synthetic

14.Press e if this is the correct supply type.

To change the supply type, use the arrow keys to scroll to the correct supply type and then press e.

1 = High (recommended for synthetic supplies)

2 = Low (default - recommended for paper supplies)

nDo not select Supply Types 3 or 4 since they require different loading methods.

3-6

Page 20
Image 20
Monarch 6030TM manual Feed Roller Pinch