Chapter 3. Loading Supplies
9.Close the supply cover completely.
10.Press 1if you are loading the same supply type. Press eto start your application. Or, press 2 to load a different supply type or size. You will see:
Supply Type?
1 = Synthetic
11.Press e if this is the correct supply type.
To change the supply type, use the arrow keys to scroll to the correct supply type and then press e.
1 = High (recommended for synthetic supplies)
2 = Low (default- recommended for paper supplies)
3 = Specialty Paper
nDo not select Supply Type 4 since it requires a different loading method.
You will see:
Supply Width?
WIDTH = 2.0
12.Press e if this is the correct width.
To change the width, use the arrow keys to scroll to the correct width and then press e.
1 = 1.2
2 = 1.5
3 = 2.0
You will see:
ENTER STK LENGTH 4.0z
