4. Press e. You will see:
Dot #### GOOD
Dot Value = ###
Valid values are 258-330. If the value is not within range,
please make a note and call Service.
To run the Temperature test:
1. From the PRINTHEAD TESTS menu, press > until you
see:
Dot resistance
Temperature
2. Press e. You will see:
Printhead
Temp = ###
Refer to the chart on the previous page.
3. Press b.
Checking the Battery
The Battery test displays the acceptable recharging capacity
of the battery cell.
To run the Battery test:
1. From the HDW TEST MENU, press > until you see:
Printhead
Battery
Chapter 10. Using Diagnostics
10-15