6030 Operator’s Handbook

Selecting Bar Codes for Scanning –––––––––––––––––––––––––––––

You must enable and disable each specific bar code type for scanning. You can scan any bar code listed below.

UPC/EAN

CODABAR

LAC CODE39

Code 128

I2of5

MSI

MaxiCode

 

nF You must select 1 check digit or 2 check digits for MSI bar codes.

FYou must enable or disable function codes for Code 128 bar codes.

FYou must enable or disable supplements for UPC/EAN bar codes.

To enable or disable a bar code for scanning:

1.From the CONFIG. MENU, press > until you see:

Shutdown Timer

Scanner

2.Press e. You will see:

SCANNER MENU

UPC/EAN

3.Press e. You will see:

UPC/EAN

Enable

nWhen UPC/EAN is enabled, you can scan UPCA, UPCE, EAN8, EAN13, or LAC bar codes.

6-6

Page 46
Image 46
Monarch 6030TM manual Selecting Bar Codes for Scanning, Msi