
6030 Operator’s Handbook
3.Press > until you see:
Send
Serial Port
4.Press e.
From this point, you can set the following communications parameters:
Baud Rate | 19.2K, 9600*, 4800, 2400, 1200 |
|
|
Parity | NONE, EVEN, ODD*, MARK, SPACE |
|
|
Data Bits | 7*, 8 |
|
|
Stop Bits | 1*, 2 |
|
|
Flow Control | NONE, XON/XOFF*, DTR, RTS, MODEM |
|
|
Echo BEL | Enable*, Disable |
|
|
ENQ Polling | Enable, Disable* |
|
|
Resp Timeout | 30* (seconds), 0 (minimum), 480 (maximum) |
|
|
nEcho BEL, ENQ Polling and Response Timeout are all options used by the application or set by the System Administrator.
5.Press < or > to display a parameter and press e to select it.
6.Press < or > to display a value and press e to select it.
* Factory set defaults.