Troy-Bilt 203779GS manual Howto Stop YourPressureWasher, How to Use Accessory Tray

Models: 203779GS

1 44
Download 44 pages 12.22 Kb
Page 13
Image 13
Howto Stop YourPressureWasher

WARNING

The highpressurestreamofwaterthatthis equipmentproducescancutthroughskinandits

possible amputation.

_ nderlying tissues, leading to serious injury and Spray gun traps high water pressure, even when

engine is stopped and water is disconnected, which can cause injury.

. DONOTallowCHILDRENto operatepressurewasher.

Keephighpressurehoseconnectedto pumpandspraygun whilesystemis pressurized.

NEVERaimspraygunat people,animals,or plants. DONOTsecurespraygunin openposition. DONOTleavespraygununattendedwhilemachineis running.

NEVERuseaspraygunwhichdoesnot haveatriggerlockor trigger guardin placeandin workingorder.

Alwaysbecertainspraygun,nozzlesandaccessoriesare

correctlyattached.

WARNING

_

ontact with muffler area can result in serious

 

burns.

structures or damage fuel tank causing a fire.

._I_.K Exhaustheat/gases can ignite combustibles,

. DO NOTtouch hot parts and AVOID hot exhaust gases.

Allow equipment to cool before touching.

Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

Codeof FederalRegulation (CFR)Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in

effective working order, complying to USDAForest service standard 5100-1C or later revision. In the State of California a

spark arrester is required under section 4442 of the California Public resources code. Other states may havesimilar laws.

Howto Stop YourPressureWasher

1.Releasespray gun trigger and let engine idle for two minutes.

2.Turn engine off according to instructions given in engine operator'smanual.

3.ALWAYSpoint spray gun in a safe direction and squeezespray gun trigger to release retained high water pressure.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its

)ossible amputation.

_ nderlying tissues, leading to serious injury and Spray gun traps high water pressure, even when

engine is stopped and water is disconnected, which can cause injury.

Keephighpressurehoseconnectedto pumpandspraygun whilesystemis pressurized.

. ALWAYSpointspraygunin safedirectionandsqueezespray guntrigger,to releasehighpressure,everytimeyoustop engine.Engagetriggerlockwhennot in use.

IMPOBTANT:Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

4. Engagetrigger lock on spray gun when not in use.

How to Use Accessory Tray

The unit is equipped with an accessory tray with placesto store your spray gun, nozzleextension and quick connect spray tips. There is also a hook at the front of the accessory tray to hold your high pressure hose.

NOTE:The extra hole in the tray is for storing a utility brush. The extra clip in the tray is for storing a turbo nozzle.The brush and turbo nozzleare NOTincluded with your pressure washer. You can buy these items as optional accessories.

1.Place nozzleextension through hole on accessory tray, as shown.

13

Page 13
Image 13
Troy-Bilt 203779GS manual Howto Stop YourPressureWasher, How to Use Accessory Tray