5.Make sure garden hose is connected to water inlet. Checkthat high pressure hose is connected to spray gun and pump. Turn on water.
NOTICE
You must attach all hoses before you start the engine. Startingtheenginewithoutallthe hosesconnectedandwithout the waterturnedONwill damagethepump.
Damageto equipmentresultingfromfailureto followthis instructionwill voidwarranty.
6.Engagetrigger lock on spray gun and start engine following instructions How to Start Your Pressure Washer.
7.Apply detergentto a dry surface, starting at lower portion of areato bewashed and work upward, using long, even, overlapping strokes.
8.Allow detergent to "soakin" for
IMPORTANT:You must flush the detergent siphoning system after each use by placing the filter into a bucket of clean water, then Funthe pressure washer in low pressure for
PressureWasher Rinsing
For Rinsing:
1.Engagetrigger lock on spray gun.
2.Remove black spray tip from nozzleextension.
3.Selectand install desired high pressure spray tip following instructions How to Use Spray Tips.
4.Keepspray gun a safe distance from areayou plan to spray.
WARNING
fromfall.
Kickback | spray gun can cause you to |
, Operatepressurewasherfroma stablesurface.
•Beextremelycarefulif you must usethe pressurewasherfrom a ladder,scaffolding,or anyothersimilarlocation.
•Firmlygraspspraygunwithboth handswhenusinghigh pressuresprayto avoidinjurywhenspraygunkicksback.
5.Apply a high pressuresprayto a small areaandthen checksurface for damage. If no damageis found, you can assumeit is okayto continuerinsing.
6.Startat top of areato be rinsed,working down with same overlappingstrokesas you usedfor cleaning.
Cleaning Detergent Siphoning Tube
If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine.
1.Place detergent siphoning tube/filter in a bucket full of clean water.
2.Engagetrigger lock on spray gun.
3.Remove high pressure spray tip from nozzleextension.
4.Selectand install black detergent spray tip following instructions How to Use Spray Tips.
5.Flush for
6.Shut off engine following instructions How to Stop Pressure Washerand turn off water supply.
7.ALWAYSpoint spray gun in a safe direction and squeezespray gun trigger to release retained high water pressure.
WARNING
The high pressure stream of water that this equipment produces can cut through skin and its
)ossible amputation.
_ nderlying tissues, leading to serious injury and Spray gun traps high water pressure, even when
engine is stopped and water is disconnected, which can cause injury.
,Keephighpressurehoseconnectedto pumpandspraygun whilesystemis pressurized.
• ALWAYSpointspraygunin safedirectionandsqueezespray {'D guntrigger,to releasehighpressure,everytimeyoustop engine.Engagetriggerlockwhennot in use.
IMPORTANT:Spray gun traps high water pressure, even when engine is stopped and water is disconnected.
Automatic Cool Down System (Thermal Belief)
If you run the engine on your pressure washer for
thewarm waterontotheground.
15
