13
2. Replace the control panel.
3. Make sure all other hardware installations are complete.
4. Switch the power source selector on the back panel to AC or
DC according to the type of power supply(s) you are using.
5. Plug one end of the power cord into the socket on the back
panel.
6. Plug the other end to a properly rated power source.
7. Turn on the master power.
NMS Overview
The ZyXEL NMS consists of the RS-1612 rack and a PC running
ZyView NMS software. Communication between the PC and the
RS-1612 rack takes place via an IP based network which is linked
by a LAN or a combination of LAN and WAN. ZyView identifies
each RS-1612 rack by their assigned IP address. Using this
dedicated IP address ZyView can send commands to and receive
status reports from the rack.
221127(27(,))25$1<5($621<28&+226(1277286(7+(=<9,(:106$1<6103
3/$7)250&$1%(86('720$1$*(7+(5$&.
Configuring the RS-1612 rack
Follow the steps given below to configure your RS-1612 rack:
1. Use an RS-232 cable to connect the COM port of your
computer to the DTE/RS-232 port of the rack.
2. From your terminal use a communications program such as
Microsoft Hyper Terminal for Windows 95 to enter the data
format as follows:
9600, N, 8, 1