ZyXEL Communications manual Setting up the RS-1612 Rack, Modem Card

￿￿Installation

This chapter gives detailed instructions for installing one or more modems into the rack.

Setting up the RS-1612 Rack

Setting up the RS-1612 rack consists of plugging in modem cards, connecting phone lines, connecting to computers, and establishing power. After completing the power on sequence the LCD control panel will display the slot status of each modem. The modem LED’s will display the RS-232 connection status.

Modem Card

The RS-1612 has sixteen available slots for modem cards. You may use any slot for a card without regard to the slot number or sequence.

To install a card:

1.Hold the modem card by the front and slide it into an available slot.

2.Push the card gently but firmly until it seats.

3.Screw the modem card holding screws into place to secure the card in its slot.

2￿127(￿ 7+(￿02'(0￿&$5'￿:,//￿127￿6($7￿$1'￿7+(￿+2/',1*￿6&5(:6￿:,//￿127￿7,*+7(1￿,) <28￿,167$//￿7+(￿02'(0￿&$5'￿836,'(￿'2:1￿

To remove a card:

1. Unscrew the modem card holding screws.

11