Installation Instructions
Zoneline Air Conditioners
Questions? Visit our Website at: GEAppliances.com or call 800.GE.CARES (800.432.2737).
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT – Save these
instructions for local inspector’s use.
•IMPORTANT – Observe all
governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the owner.
•Note to Owner – Keep these instructions for future reference.
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
TOOLS YOU WILL NEED
Phillips screwdriver | Adjustable wrench |
Saw | Hammer |
CAUTION:
•All electrical connections and wiring MUST be installed by a qualified electrician.
•Follow the National Electrical Code (NEC) and/or local codes and ordinances.
•For personal safety, this Zoneline unit and case must be properly grounded.
•Protective devices (fuses or circuit breakers) acceptable for Zoneline installations are specified on the nameplate of each unit.
•Do not use an extension cord with this unit.
•Aluminum building wiring may present special
•When the unit is not running there is still voltage to the electrical controls.
•Disconnect the power to the unit before servicing by:
1.Removing the power cord (if it has one) from the wall receptacle.
OR
2.Removing the branch circuit fuses or turning the circuit breakers off at the panel.
Tape measure
WARNING: Before beginning the installation, switch power off at the service panel and lock the area to prevent power from being switched on accidentally. When the area cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
10
