GE 49-7419-2 Typical Utility Closet And Dimensions, For Reference Only, Side View, Top View

Installation Instructions

TYPICAL UTILITY CLOSET AND DIMENSIONS

(FOR REFERENCE ONLY)

UNIT INSTALLED THROUGH FRONT OF CASE		UNIT INSTALLED THROUGH SIDE OF CASE
	Top View		Top View

Architectural Louver

		111⁄2″
		3″ min.
	10″	10″
3″		duct
min.
Unit		4″ min.
front	Door/access panel

Architectural Louver

	111⁄2″	3″ min.
	10″	Door/access panel
10″	duct
3″
min.
Unit front	5″ min.

Side View

Inside wall	Rigid
	ductwork		Outside wall
	Flexible or
	rigid duct		Unit
• 4″ min. from front of case – Unit	Air discharge		Wall plenum
	outlet
installed through FRONT of case.
• 5″ min. from front of case – Unit			Exterior/Outside
installed through SIDE of case.
• 3″ min. from two sides of case.	31″	Wall plenum	Plenum
		divider
Option 1			cutout
			321⁄4″ H
Access panel with
		Filter bracket	x 20″ W
return air grille
Option 2		Drain fitting 3⁄4″
Return air grille

		Bottom of case approx. 2″
A	Secure platform	above bottom of plenum
	to the floor	Wall plenum
8″ min.	Platform: 231⁄4″ x 231⁄4″ square
for drain	Min. load capacity: 175 lbs.
access
B		Bottom of case approx. 2″
		above bottom of plenum
	Platform

A Minimum recommended access door width: 30″		Field supplied
	Outside wall	outer flashing

BMinimum recommended access door height: 50″

15