Care and cleaning. | GEAppliances.com |
Turn the Zoneline off and disconnect the power supply before cleaning.
Indoor/Outdoor Coils
The exhaust coils on the Zoneline should be checked regularly. If they are clogged with dirt or soot, they may be professionally steam cleaned by your GE service center. You will need to remove the unit from the case to inspect the coils because the dirt
Outdoor coils
| Have the coils cleaned regularly. |
|
|
Drain |
|
Clean the drain system regularly to |
|
prevent clogging. |
|
|
|
Base Pan |
|
In some installations, dirt or other debris may be | In some areas of the United States, a |
blown into the unit from the outside and settle in | substance may be present in the base pan. |
the base pan (the bottom of the unit). | Check it periodically and clean, if necessary. |
|
Air Filters
To maintain optimum performance, change the filter at least every 30 days.
Safety Instructions
Operating Instructions
Care and Cleaning
The most important thing you can do to maintain the Zoneline is to change the filter at least every 30 days. Dirty filters reduce cooling, heating and air flow.
Changing the filter will: Decrease cost of operation, save energy, prevent clogged heat exchanger coils and reduce the risk of premature component failure.
CAUTION: Do not operate the Zoneline without the filter in place. If a filter becomes torn or damaged, it should be replaced immediately.
Operating without the filter in place or with a damaged filter will allow dirt and dust to reach the indoor coil and reduce the cooling, heating, airflow and efficiency of the unit.
Replacement filters should be purchased from your local retailer where air conditioner and furnace accessories are sold.
Filter size required is 20″ x 20″ x 1″.
To remove and replace the filter:
Filter
Return air grille
Remove filter
Filter
9 | |
return air grille |
Troubleshooting Tips
Consumer Support
