JVC GR-SXM25 manual Allows you to set the current date and time pg, Cassette pg, Recording pg

26ENRECORDING

AdvancedFeatures(cont.)

Menu Screen Available Using The MENU Button (cont.)

DATE/TIME	Allows you to set the current date and time (☞ pg. 7).
TAPE LENGTH	Allows you to set the tape length depending on the tape used (☞ pg. 8).
S TAPE	OFF	When set to “OFF”, allows you to record in VHS on an S-VHS
	AUTO	cassette (☞ pg. 10).
REC TIME	This feature allows you to set the parameters for Animation and Time-Lapse
	recording (☞ pg. 33).
INT. TIME	This feature allows you to set the parameters for Self-Timer (☞ pg. 32) and Time-
	Lapse recording (☞ pg. 32, 33).
TALLY LAMP	OFF	The tally lamp remains off at all times.
	ON	The tally lamp comes on to signal the start of recording.
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a computer
	using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO MODE	OFF	Automatic demonstration will not take place.
	ON	Demonstrates certain functions such as Fade/Wipe, etc. When
		“DEMO MODE” is set to “ON” and the Menu Screen is closed,
		the demonstration starts.

NOTES:

●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

●By turning off the camcorder or inserting a tape whose Erase Protection tab is in the position that allows recording into it, “DEMO MODE” is set to “OFF” automatically.

●During the demonstration, all functions except zoom are disabled.

: Factory-preset