JVC GR-SXM25 manual Loading/Unloading a Cassette, RecordingPlayback

Cassette holder

PUSH Button EJECT Switch

Turn to take up slack.

Erase Protection Gear

EN9

Loading/Unloading A Cassette

1	OPEN LCD MONITOR	STARTED
	Open the LCD monitor to an angle of over 60
	degrees.
2		GETTING
	OPEN CASSETTE HOLDER
	Slide EJECT until the holder opens. Do not use force
	to open.
3
	INSERT/REMOVE CASSETTE
	Make sure the label is facing outward.
4
	CLOSE CASSETTE HOLDER
	Press PUSH and make sure the holder is closed and
	locked.
5
	CLOSE LCD MONITOR
	First make sure the holder is closed. Then close the
	LCD monitor.

NOTES:

●Closing the LCD monitor while the cassette holder is still open may cause damage to the LCD monitor.

●The cassette holder can’t be opened unless a power supply is attached.

●Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack.

●Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.

●The cassette holder cannot be opened while the camcorder is in the record mode.

Compatibility Between S-VHS And VHS

RecordingPlayback

Blank tape Camcorder Recorded tape Cassette adapter

S-VHS VCR

S-VHS-C		S-VHS
cassette		recordings
VHS-C		VHS
cassette		recordings
Blank tape	Camcorder	Recorded tape Cassette adapter

•The recorded format (S-VHS or VHS) is automatically detected when playback begins.

Regular VHS VCR

•S-VHS recorded tapes cannot be viewed on regular VHS VCRs.