Power Zoom Lever
Recording
Start/Stop
Button
EN11
Grip Adjustment
1 |
| EXPAND LOOP | STARTED |
|
| ||
| Separate the Velcro strip. |
| |
2 |
|
|
|
| INSERT HAND | GETTING | |
| Pass your right hand through the loop and grasp the | ||
|
| ||
|
| grip. |
|
3 |
|
|
|
| ADJUST STRAP LENGTH |
| |
| Adjust so that your thumb and fingers can easily |
| |
|
| operate the Recording Start/Stop Button and Power |
|
|
| Zoom Lever. Refasten the Velcro strip. |
|
3 | Viewfinder Adjustment |
2
180°
1
1 SELECT OPERATION MODE
Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).
2 POSITION VIEWFINDER
Adjust the viewfinder manually for best viewability (see illustration on left).
3 ADJUST DIOPTRE
Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
| Set “POWER” to | Shoulder Strap Attachment | |
| “CAMERA” |
| |
| (“AUTO” or | ATTACH STRAP | |
| “PRO.”) | ||
PAUSE | 1 Following the illustration on left, thread the strap | ||
| |||
|
| ||
|
| through the top of the eyelet 1, then fold it back and | |
|
| thread it through the buckle 2. Repeat the procedure | |
|
| to attach the other end of the strap to the other eyelet | |
1 |
| 3, making sure the strap is not twisted. | |
2 | 4 | ADJUST LENGTH | |
| 2 Adjust as shown in the illustration on left 4. | ||
3 |
| Tripod Mounting | |
|
|
1 ALIGN AND TIGHTEN
Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a
