6 EN
GETTING STARTED
(cont.)Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
1

SWITCH OFF POWER

Switch off the unit’s power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).
2

REMOVE BATTERY HOLDER

Pull out the battery holder.
3

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have
the “+” mark visible.
4

RE-INSERT HOLDER

Slide the holder back into the slot until you hear a
click.
NOTES:
●

See “SAFETY PRECAUTIONS” (

Z

pg. 2) for information

on safe handling of lithium batteries.

●

To avoid losing the battery and/or battery holder, place

the camcorder with the grip side up as shown in the

illustration when inserting/removing the battery.

Slot
Battery holder