JVC GR-SXM25 manual Manual White Balance Operation, SET Manual White Balance, Enter Setting

White paper

EN31

Manual White Balance Operation

If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.

Select Dial
	Display
4NEXT
M. W. B.		AUTO
D . ZOOM		ON
TELE MACRO		OFF
DATE TIME
TAPE LENGTH T45
S TAPE		AUTO

Power Switch

Menu Screen

	SELECT OPERATION MODE
1 Follow steps 1 through 4 of the white balance
	adjustment (☞ pg. 30), and select “MWB”.
	SET MANUAL WHITE BALANCE
2 Hold a sheet of plain white paper in front of the
	subject. Adjust zoom or position yourself so that the
	white paper fills the screen.
	ENTER SETTING
3 Press the Select Dial until “MWB” begins blinking.
	•When the setting is completed, “MWB” stops
		RECORDING
4 Press the Select Dial again to close the Menu Screen.
	blinking, and the Menu Screen reappears with the
	highlight bar on “RETURN”.
	CLOSE MENU SCREEN
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.

NOTES:

4RETURN

	M.W.B.	M.W.B. Menu
AUTO
: FINE
: CLOUD
: HALOGEN
MWB
EXIT

●In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus manually (☞ pg. 29).

●A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the tint of the subject will differ depending on the white balance settings. Use this function for a more natural result.

●Once you adjust white balance during Manual White Balance operation, the setting is retained even if the power is turned off or the battery removed.