USING FRONT A/V INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the | AUX |
AUDIO/VIDEO input jacks on the front of the unit. |
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of this unit.
Then press [CHANNEL K/L] until “AUX” appears on the screen.
VIDEO AUDIO | POWER | VOLUME | CHANNEL | STOP/EJECT REW PLAY F.FWD REC/OTR | EARPHONE |
VIDEO | AUDIO | [Front of the unit] |
| ||
|
| Audio cable |
(IN) |
| (IN) (commercially available) |
|
| To the Audio output jack |
| Video cable (commercially available) | |
| To the Video output jack | |
(OUT)
(OUT)
ex.
VCR or video camera, etc.
TV OPERATION AND SETTINGS
WATCHING A TV PROGRAM
1Plug in the unit power cord
Plug the unit power cord into a standard AC outlet.
NOTE:
• If any digits appear in the corner of the screen, press [POWER] without unplugging the power cord.
2Turn on the unit
Press [POWER] to turn on the unit.
3Select the channel number
Press [CHANNEL K/L] or the Number buttons to select your desired channel number.
Notes for using the Number buttons:
¡You must precede
¡When selecting cable channels which are higher than 99, press [+100] first, then press the last two digits. (Example: to select channel 125, first press [+100] then press [2] and [5].)
4Adjust sound
Press [VOLUME X/Y] to adjust the volume.
Press [MUTE] to instantly mute | VOLUME 20 |
the sound. | C C C C C C C C C C C C C C C C |
|
Press it again to restore the previous sound level.
TO WATCH CABLE OR SATELLITE CHANNEL
•If the unit is connected to a cable box or satellite box, press [CHANNEL K/L] to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
•When an external equipment is connected to the front AUDIO/VIDEO input jacks, press [CHANNEL K/L] repeatedly until “AUX” appears on the screen.
- 10 - | EN |
