Basic Operations
• Adjusting the treble
This adjustment can be performed only when the
"TREB<G>" ~ ''TREB<F>''
*The factory default setting is ''TREB<G>''.
TREB<G>:The factory default setting is "0". (Adjustment range: +7 to
TREB<F>: The factory default setting is "10k".
(Adjustment range: 10k/12.5k/15k/17.5k)
• Adjusting the balance
*The factory default setting is "CENTER" (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))
•Adjusting the fader
*The factory default setting is "CENTER" (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))
•Setting the subwoofer
You can set the low pass filter of subwoofer.
"THROUGH" ~ "LPF 50" ~ "LPF 80" ~ "LPF 120"
*The factory default setting is "THROUGH".
• Adjusting the subwoofer output volume
You can adjust the volume output from the unit's subwoofer output terminal.
This adjustment can be performed only when the
or decreases the subwoofer volume.
*The factory default setting is "0". (Adjustment range: +6 to
*When the volume level is more than 30, the subwoofer volume adjustment value can not reach +6.
•Adjusting the high pass filter
The setting changes in the following order: "120" H ''THROUGH''
*The factory default setting is "THROUGH" (through).
*This is supported only with amplifiers equipped with this function. Output is not supported from RCA cables.
Note:
•During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode.
Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.
*The factory default setting is "OFF'(off).
1.Press and hold the [SOUND] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect.
2.Press and hold the [SOUND] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect.
DXZ385USB 15