DVD Changer Operations
By connecting an optional DVD changer that supports CeNET wiring, this unit can be used to control the DVD changer. To view DVDs, an optional monitor is required.
•The DVD control and display functions supported by this unit are limited; the unit does not support all the functions possible on a DVD changer.
For fullest functionality, use the remote control unit provided with your DVD changer to control its operations. For details, consult the Owner'sManual provided with your DVD changer.
Note:
•The following operations are the same as for CD and CD Changer modes:
*Pause
* Track selection
*Scan play
*Repeat play *Random play
See "CDIMP3IWMAIAAC Operations" (page 18-
21)and "CD Changer Operations" (page 32) for details.
TV Operations
Note:
•The following operations are performed the same as for radio mode:
*Channel selection
*Storing channels in memory *Calling channels from memory *Auto store
*Preset scan
See "Radio Operations" (page
TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Watching a TV
1.Press the [SRC] button and select the TV mode.
2.Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3.Press the [~] or [~] button to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
*The factory default setting is "TV".
1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [~] or [~~] button to select "TV! VTR".
3.Press and hold the
4.To return to the TV broadcast, press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.
5.Press the [~] or [~~] button to select "TV! VTR".
6.Press and hold the
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
*The factory default setting is "ON".
1.Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [~] or [~] button to select "TV DIVER".
3.Press the [A] or [T] button to set to "ON" or "OFF".
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4.Press the [DISP] button to return to the previous mode.
DXZ385US8 33
