Cancel the segment repeat playback function:
To cancel the segment repeat playback, press either STOP (4), REC (s), 9, or the 0button.
"
•If you press and hold 0and rewind past the start position, or press and hold 9and fast forward past the end position, the segment repeat playback will be canceled.
Erasing
1Select the file you want to erase.
2While the recorder is during stop mode, press the ERASE button.
•File number and [NO] will flash on the display.
3Press the 0button to select [yES].
4Press the `OK button.
•Erasing begins and [ERASE] flashes on the display.
Erasing all files in a folder:
1Select the folder you want to erase.
2While the recorder is during stop mode, press the ERASE button.
3Press the ERASE button again.
•[ALL] and [NO] will flash on the display.
4Press the 0button to select [yES].
5Press the `OK button.
•Erasing begins and [ERASE] flashes on the display.
"
•Locked files cannot be erased.
•If an action is not selected within 8 seconds, the recorder will return to stop mode.
•It may take over 10 seconds to complete processing. Never remove batteries during this time because data may be corrupted. In addition, carefully check the remaining battery level in order to ensure that the battery will not run out while processing.
•You cannot delete folders with this recorder.
Setting an index mark
1While the recorder is during recording mode or playback mode, press the FOLDER/INDEX button.
Index number
•Even after an index mark is placed, recording or playback will continue so you can place index marks in other locations in a similar manner.
Clearing an index mark:
While the index number appears for approximately 2 seconds on the display, press the ERASE button.
•Erasing an index mark will make the index number after it move up automatically.
"
•Up to 16 index marks can be set in a file. If you try to place more than 16 index marks, the [FULL] message will be displayed.
•Index marks cannot be set or erased in a locked file.
LCD display information
While the recorder is during stop mode, pressing and holding the STOP (4) button will make the display switch information in the following order:
•Current date ➔ Current time ➔ Remaining recording time ➔ Current date …
While the recorder is during recording mode, pressing the DISP/MENU button will make the display switch information in the following order:
•Elapsed recording time ➔ Remaining recording time ➔ Elapsed recording time …
While the recorder is during stop mode or playback mode, pressing the DISP/MENU button will make the display switch information in the following order:
•Count up ➔ Count down ➔ Recording date ➔ Recording time ➔ Count up …
Menu setting method
You can set each menu item as follows.
1While the recorder is during stop mode, press and hold the DISP/MENU button.
2Press the + or − button to move to the item you want to set.
3Press the 9or 0button to change the setting.
4Press the `OK or +/− button to set.
5Press the STOP (4) button to close the menu screen.
•The setting menu icons on the display will turn on.
1
2
3
4
5
6
7
8
9
1File lock
2Recording mode
3Microphone sensitivity
4VCVA
5Timer recording
6Noise cancel
7Continuous playback
8Alarm playback
9Repeat playback
"
•The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied.
Recording mode [MODE]
[HQ]: High quality sound recording.
[SP]: Standard recording.
[LP]:
"
•To record a meeting or a lecture clearly, set other than [LP].
EN
