®
Page 9 www.midlandradio.com
GXT500/550 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the MONITORbutton for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your GXT500/550 Series can scan all 22 channels for activity. To
enter, quickly press the SCANbutton. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 22 channels and stop on
any active channel for 5 seconds before resuming scan.
When you press the PTTbutton to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCANbutton.
Model GXT500/550 Series
MENU Channel eVOX
1~22 oF/1/2
Privacy
oF~38
Roger Beep
On/Off
Power
H/M/L
Call Tone
1~5
Vibrate
On/Off
WX Channel
1~10
Press &
hold Menu
button
Silent Operation
On/Off