3Com OfficeConnect Remote 812 manual TELNET information, Quick Setup IP Information

4-4CHAPTER 4: QUICK SETUP

TELNET information

Question	Default	Your System
Do you want to allow command line management via	[yes]
TELNET?

For TELNET management of the system, you need to create a user name and password to control access.

Question	Default	Your System
What user name will be allowed to manage this system?	[root]
What password will be used for this user ?	[ ]

Quick Setup IP Information

The OCR 812 uses a network name to identify the network for future management commands.

Question	Default	Your System
Enter the network name of your IP network:	[ip]
Enter the IP address for the OfficeConnect Remote	[192.168.200.25
812:	4]

The IP mask can be specified either as a class ("A", "B", or "C"), the number of one bits in the mask, or as an address in the format 255.x.x.x.

Question	Default	Your System
What should the mask be set to?	[C]

You need to specify the framing for the IP network. It should be either "ethernet_ii" or "snap".

Question	Default	Your System
What is the framing for the IP network?	[ethernet_ii]

You can use the Routing Information Protocol (RIP) to exchange routing information with other routers on the network.

Question	Default	Your System
Do you want to run RIP?	[yes]
Choose the version of RIP to run:	[v2]